In industrial production, flue gas temperature is one of the key indicators of boiler and similar equipment’s operational efficiency. An increase in flue gas temperature not only affects normal operation but may also lead to energy waste and environmental pollution. Therefore, understanding the reasons behind the rise in flue gas temperature is crucial to improving equipment efficiency, saving energy, and protecting the environment. This article will discuss in detail the reasons for increased flue gas temperature and provide corresponding solutions.
Reasons for High Flue Gas Temperature
- Fouling and Slagging on Heat Surfaces
Boiler heat surfaces, such as air preheaters and water-cooled walls, tend to accumulate ash and slag over time. These deposits reduce heat transfer efficiency, preventing the heat in the flue gases from being effectively transferred to the working medium, thus raising the flue gas temperature. Moreover, fouling and slagging can lead to corrosion and wear of the heat surfaces, further lowering operational efficiency and safety. Therefore, regular cleaning of heat surfaces is essential to lower the flue gas temperature. - Excess Air Coefficient Too High
An excessively high excess air coefficient during combustion leads to more air entering the boiler than necessary. This increases the flue gas volume, carrying away more heat and raising the flue gas temperature. Additionally, excess air increases flue gas heat loss and reduces boiler thermal efficiency. Controlling the air volume and maintaining an appropriate excess air coefficient are key to reducing flue gas temperature. - Air Leakage Issues
Air leakage in parts like the furnace and flue ducts can cause excess air to enter the boiler, increasing flue gas volume and temperature. Air leakage can also cause instability in boiler internal pressure, compromising safe operation. Sealing these areas to reduce air leakage is crucial for controlling flue gas temperature. - Increased Feedwater Temperature
Higher feedwater temperatures reduce the temperature difference between flue gases and the working medium, thus reducing heat transfer, which raises flue gas temperatures. Proper control of feedwater temperature is necessary to maintain an appropriate heat transfer temperature difference. - Fuel Properties
Changes in fuel properties, such as higher moisture content, can increase flue gas volume and raise the flue gas temperature. The fuel’s calorific value and ash content also impact flue gas temperature. Using low-moisture, high-calorific value, and low-ash coal can improve combustion efficiency and lower flue gas temperature. - Coal Powder Fineness
Coarse coal powder leads to incomplete combustion, increasing unburned carbon in flue gases and raising the flue gas temperature. Conversely, very fine coal powder increases mill energy consumption and wear, destabilizing combustion. Controlling coal powder fineness and maintaining an appropriate particle size distribution are crucial to lowering flue gas temperature. - Improper Combustion and Air Distribution
If burner placement or air-to-fuel ratio is improper, it can cause flame instability, resulting in shorter flue gas residence time and incomplete heat transfer, leading to higher flue gas temperatures. Optimizing burner arrangement and air distribution ensures stable combustion and heat transfer. - Furnace Negative Pressure Variations
Excessive negative pressure in the furnace can lead to unstable flue gas flow, affecting heat transfer and flue gas discharge, thus increasing flue gas temperature. Properly controlling furnace negative pressure is vital for stable gas flow and reduced temperature. - Interruption of Bottom Sealing Water
The role of bottom sealing water is to prevent air leakage at the bottom of the furnace. If the sealing water system fails, air leakage increases, leading to more flue gases and higher temperatures. Regular inspection and maintenance of the bottom sealing water system ensure stable operation and lower flue gas temperature. - Changes in Boiler Load
Higher boiler loads result in increased fuel consumption and flue gas volume, raising flue gas temperature. Adjusting fuel and air supply according to load variations is essential for maintaining appropriate flue gas temperatures.
Solutions for High Flue Gas Temperature
- Optimizing Combustion
By controlling air volume and fuel-air ratio, we can ensure complete combustion and proper flame positioning. Regular inspection and maintenance of burners are crucial for efficient operation. - Maintaining Heat Surface Cleanliness
Regular cleaning of boiler heat surfaces prevents fouling and slagging, ensuring smoother heat transfer. High-pressure water guns or mechanical cleaning methods are effective for cleaning severely fouled surfaces. - Reducing Air Leakage
Sealing furnace and flue duct areas helps reduce air leakage, improving combustion efficiency and reducing flue gas temperature. - Improving Fuel Quality
Using low-moisture, high-calorific, and low-ash coal types enhances combustion efficiency and lowers flue gas temperature. - Adjusting Pulverizing System Parameters
Controlling the mill outlet temperature and coal powder fineness optimizes coal powder distribution and combustion efficiency, lowering flue gas temperature. - Ensuring Quality of Steam-Water System
Regular testing of the steam-water system and cleaning systems with poor water quality ensures better heat transfer and reduced flue gas temperature. - Optimizing Heat Surface Layout
Redesigning heat surface layout, such as adding economizer pipe arrangements or optimizing air preheater structure, improves heat transfer efficiency and reduces flue gas temperature. - Enhancing Operational Monitoring and Management
Regular monitoring and analysis of boiler operational data help detect anomalies. Proper staff training ensures safe and efficient boiler operation.
In conclusion, high flue gas temperature is caused by various factors. A comprehensive approach is necessary to optimize and improve boiler performance, ensuring energy efficiency, safety, and environmental protection.
About DHB’s Economizers
At DHB, we specialize in high-performance economizers that enhance the energy efficiency of your boiler system by recovering waste heat from flue gases. Our economizers are designed to minimize energy loss, reduce fuel consumption, and lower flue gas temperature. If you’re looking to optimize your boiler system and achieve greater energy savings, contact us today to learn more about our economizer solutions. We’re here to help you achieve the best performance from your equipment.
